-
-
RL250 Chain Roller Kit
-
Complete bolt-in kit to convert the original
rubber tensioner setup to a plastic roller. Utilizes the original tensioner
arm but with no drilling.
-
RL250 Foot Peg Extensions
-
Added width gives a better platform for the boot
and more control over the bike. Welds to existing peg.
-
RL250 Foot Peg Springs
-
Reproduction springs of correct diameter wire.
-
RL250 Fork Brace/Fender Mount
-
Stiffen the front end for more positive
steering. Use with modified front fender.
-
RL250 Frame Repair Kit
-
A complete kit of the steel required to repair
the left side frame break. Complete
installation instructions included.
-
RL250 Front Brake Cable Guide
-
Reproduction Brake Cable Guide of the correct
size music wire zinc plated for protection.
-
Number Plate
-
Heat formed Kydex plastic correctly sized
for AHRMA competition.
-
RL250 Spoke Sets
-
Stainless Steel front and rear spoke sets.
-
-
RL250 and Beamish Rear Sprocket Spacer
-
The spacer provides the required sprocket
offset that the original dished sprockets had and allows the use of aftermarket rear sprockets.